How To Set Timer On Braun Coffee Maker

Java maker Instructions
Type 3107
www.braunhousehold.com
KF6050. KF7000. KF7030. KF7070

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS.

The apparatus is not intended for apply by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and noesis unless they have been given supervision or instructions concerning the use of the apparatus by a person responsible for their safe.
Always unplug the appliance from the outlet when not in use and earlier cleaning. Permit cooling earlier putting on or taking off parts and before cleaning the apparatus.
To protect against the adventure of electrical shock, do not put the motor body of the blender in water or other liquids.
The utilise of attachments/accessories not sold or recommended past Braun may cause fire, electrical stupor or risk of injuries to persons.
Regularly inspect the ability string, power plug, and actual appliance for any damage. Do non operate if damaged in any way or after the appliance malfunctions. Immediately cease use of the appliance and call Braun Customer Service for exam, repair or adjustment.
Do not employ outdoors or for anything other than its intended purpose.
Snap chapeau deeply onto the carafe before serving any coffee.
Scalding may occur if the reservoir cover is opened during the brewing cycle.
The glass carafe is designed for use with this appliance simply. Information technology must never be used on a range top or in a microwave oven.
Do not gear up a hot carafe on a wet or cold surface.
Do non use a croaky carafe or a carafe having a loose or weakened handle.
Exercise not clean the carafe or keep a warm plate with abrasive cleansers, steel wool pads, or other abrasive materials.
Practice not immerse in h2o.
Regularly inspect the power string, power plug, and bodily apparatus for whatever damage. Do not operate if damaged in any way or after the appliance malfunctions. Immediately cease use of the appliance and call Braun Client Service for test, repair or adjustment.
Practice non touch hot surfaces. Use handles and buttons.
Do not permit the cord hang over the edge of the table or counter, or touch a hot surface.
Practice not identify on or near a hot gas or electric burner, or in a heated oven.
Ever fill up the h2o reservoir start, then plug the string into the wall outlet. To disconnect, press the «On/Off« button, then remove the plug from the wall outlet.
Alarm: Risk of fire or electric daze. Do non remove the base panel. No user-serviceable parts are inside. Repair should be done by authorized service personnel only.
Exercise not operate your appliance in an appliance garage or under a wall chiffonier. When storing in an appliance garage always unplug the unit from the electrical outlet. Non doing and so could create a take a chance of fire, especially if the appliance touches the walls of the garage or the door touches the unit equally it closes.
Never open the reservoir cover during the brewing cycle, even if no water is draining from the filter handbasket, since extremely hot water/java tin spill out from the filter handbasket and crusade injury. If water/coffee is non draining from the filter handbasket during the brewing cycle, unplug the unit and wait ten minutes before opening the tiptop embrace and checking the filter basket.
We advise you save all packing materials in the result that time to come aircraft of the motorcar is needed. Continue all plastic bags away from children.
This appliance has a polarized plug (i bract is wider than the other). To reduce the gamble of electrical shock, this plug will fit in a polarized outlet just one way. If the plug does not fit fully in the outlet, reverse the plug. If information technology still does non fit, contact a qualified electrician.
Practise not alter the plugin whatever way.

Relieve THESE INSTRUCTIONS
FOR HOUSEHOLD USE Just SPECIAL CORD Set up INSTRUCTIONS

A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.
Longer detachable power-supply cords or extension cords are not recommended but may be used if care is exercised. If an extension string is used:

the marked electric rating of the string set or extension cord should exist at to the lowest degree equally great as the electrical rating of the apparatus,
the cord should be bundled so that information technology volition not mantle over the countertop or tabletop where it can exist pulled on by children or tripped over unintentionally

Our products are engineered to see the highest standards of quality, functionality and blueprint.
Nosotros promise yous thoroughly savor the new Braun appliance.

Before Use
Please read the instructions carefully and completely before using the appliance.

Description of Parts and Accessories

On/Off push button
LED control panels and clock
Water reservoir incl. h2o level indicator (within)
Filter handbasket with anti-drip arrangement
Goldtone permanent filter
Reservoir encompass and showerhead
Charcoal water filter
The charcoal water filter holder
Keep warm plate
String storage
Drinking glass carafe
Flip lid (drinking glass carafe)
Coffee measuring scoop

Maximum water chapters: 12 cups (60 fl. oz.)

LED Control Panel

Brew
Use to first the brew and keep warm cycles.
Auto-ON
Utilise to programme the first time of the mash wheel. The Machine ON time can be prepare for any time, day or night. «PM» is displayed on the LED for nighttime programme times.
Car-OFF
Use to program the shut-off time of the coffee maker.
CLOCK
Displays time of day and employ to set time for automatic functions (auto-on and machine-off times).
Gear up
Employ to program the time of mean solar day, automobile on, auto of times, and water hardness level.
Make clean
Utilise to activate the descaling fashion and set the water hardness level.
1-4
Use to mash smaller amounts of coffee (up to iv cups).

OPERATING INSTRUCTIONS

Installing the Charcoal H2o Filter (A)
Use of the charcoal water filter is optional but strongly recommended. The filter eliminates chlorine, bad tastes, and odors from tap water.
The coffee maker volition operate ordinarily without it.
Replacement h2o filters can be purchased in stores, through the Braun website, or by calling Client Service.

Remove the charcoal h2o filter (7) from the polybag and soak in cold tap water for a minimum of 15 minutes.
Remove the charcoal water filter holder (viii) from the coffee maker by lifting it out of the h2o reservoir (3).
Gently printing downwards the stem and pull toward you.
compartment will flip open.
Identify the charcoal water filter in the water filter holder and close it; you lot will hear a snap indicating it is in place.
Hold the filter under cold running tap water for 10 seconds to flush. You should place the hole openings straight under the water stream.
Allow the filter to drain completely.
Position the greenish indicator to the month you installed the charcoal h2o filter. We recommend changing the charcoal h2o filter every 2 months, more than ofttimes if yous have hard tap h2o.
Replace the charcoal water filter holder in the water reservoir of the coffee maker, pushing it all the way down to the base of operations of the unit, forth the reservoir wall.

NOTE: Caution must be used when inserting the charcoal water filter. Improper placement in the water filter holder can cause fierce of the filter skin.

Switching On/Off

To switch on the java maker, press the On/Off button (i). The green indicator calorie-free will illuminate indicating that the coffee maker is in «ready» mode.
To switch off the coffee maker, press the On/Off push button once more. The greenish indicator light will turn off indicating that the coffee maker is in «stand by» mode.

Programming the Coffee Maker

Note: The java maker features a 60-second ability loss backup organization that remembers all programmed data, including fourth dimension of day and car on/off times in the outcome of a tripped breaker, unit of measurement is unplugged or power failure.

Setting the Time
When the java maker is first plugged in or when power is restored after an interruption, the LED control panel will start flashing 2:00 AM.

To set the hour, press the CLOCK button (d) for a minimum of 3 seconds. The LED control panel volition beginning flashing.
Printing and concord the SET button (e) to scroll through the numbers. Release the button one time the desired hour is displayed.
To set the minutes, printing the CLOCK push. The LED control panel will start flashing.
Press and concur the SET push button to whorl through the numbers. Release the button once the desired minutes is displayed.
Press the CLOCK button again to salve the desired time.
If during the setting process no button is pressed for 10 seconds, the fourth dimension currently set volition be saved.

NOTE: When the number count passes 12, the PM lite will be displayed on the LCD.

Earlier programming, always switch on the java maker.

Programming and Activating the AUTO ON Time

Press the AUTO ON button (b) for a minimum of three seconds.
The hours in the LED panel will kickoff flashing.
To set up the hour, press the CLOCK button (d) for a minimum of iii seconds. The LED command panel will start flashing.
Printing and hold the SET push (e) to whorl through the numbers. Release the push once the desired hr is displayed.
To set the minutes, printing the AUTO ON button.
The minutes in the LED control console will beginning flashing.
Press and hold the SET button to scroll through the numbers. Release the button once the desired minutes is displayed.
Press the AUTO ON push once again to salvage the desired fourth dimension.
The pre-set machine on time will disappear later 3 seconds and the time of twenty-four hour period will show on the LED control panel.
If during the setting process no button is pressed for 10 seconds, the auto on time currently set will be saved.

This role can merely be activated if the car on time and the fourth dimension of the twenty-four hours have been fix.

To activate the AUTO ON office:

Press the AUTO ON button (b). The green LED above the button will illuminate and the coffee maker volition commencement to brew at the pre-set car on time.
The pre-set motorcar on fourth dimension disappears afterwards 3 seconds.
When the apparatus starts brewing, the green LED Mash volition continually flash and the LED AUTO ON turns off.
Press the AUTO ON push button (b) over again to switch off the role: the dark-green LED light volition disappear.

Annotation: The Auto ON part remains activated fifty-fifty when the appliance has been switched off (ane).

Programming and Activating the AUTO OFF Fourth dimension

The auto-off time can be gear up in 5-minute intervals, anywhere from fifteen minutes to 5 hours. The default setting is 2 hours.

Press the Motorcar OFF button (c) for a minimum of iii seconds.
The default setting (ii hours) volition start flashing.
Press and agree the Gear up button (due east) to scroll through the numbers. Time displayed is in five-minute intervals.
Press the Machine OFF button again to save the desired time.
The pre-set auto-off time will disappear subsequently three seconds and the fourth dimension of day will show on the LED control panel.
If during the setting process no button is pressed for 10 seconds, the car-off time currently prepare will be saved.
This part tin can but be activated if the auto-off time has been set.

To actuate the AUTO OFF function:

Press the AUTO OFF button (c): the green LED above the button volition illuminate and the coffee maker stops keeping warm at the pre-set automobile-off fourth dimension (min. 15 minutes / max. v hours).
The pre-ready car off time disappears afterward iii seconds.
Press the Automobile OFF push (c) to switch off the part: the light-green LED lite disappears. For your boosted safety, the appliance will switch off automatically 2 hours after the brewing bike is complete if the Auto OFF office has non been activated.

Setting the Water Hardness Level
Gear up the water hardness level on the coffee maker to the water hardness level for your local area.

Press the Clean button (f) for a minimum of iii seconds.
The default setting (h3) will start flashing.
Press the Prepare push button (eastward) to scroll through the options (h1 = soft, h2 = normal, h3 = hard) and select the appropriate water hardness level.
Press the CLEAN button again to save the hardness level.
The pre-set h2o hardness disappears after three seconds and the fourth dimension of day will show on the LED control console.

one – 4 Cups Setting

Press the «1-four» push (k). The green LED above the push button will illuminate.
Press Brew (a) to start brewing.
The green LED turns off after the brewing cycle is finished.

Making Coffee (B)
Before using the coffee maker for the first time, after a long period of not using it, or after installing a new charcoal water filter, run the coffee maker through a complete brew wheel without ground java.
Use a full carafe (12 cups) of fresh common cold water.
This will remove any grit from the manufacturing process or residues that have remained in the unit.

Open the reservoir cover (6).
When filling the h2o reservoir (3) with fresh common cold h2o, refer to the carafe summit markings or the water level indicator (inside the water reservoir) and fill to the desired number of cups.
To fix the verbal amount of coffee for the Braun Mug2Go (available separately as an accessory), fill to the corresponding watermark (11 oz.) within the reservoir.
Insert the gold-tone permanent filter (5) or a paper filter (cone blazon # 4) in the filter basket (4).
Add the desired amount of ground coffee, corresponding to the number of cups being brewed. Nosotros recommend using 1 tablespoon or 1 coffee scoop of ground coffee per cup but apply more or less to suit your sense of taste.
Close the h2o reservoir and place the carafe in its position on the proceed warm plate (9).
Plug the cord into an electrical outlet and press the On/Off push button (1).
Printing the Mash button (a) to start brewing immediately or press AUTO ON (b) to commence brewing at the pre-set fourth dimension.
During brewing, the indicator calorie-free will flash continuously. Once the brewing bicycle is complete, the light will turn solid green indicating the java maker is in «keep warm» manner.

Note: The anti-baste organisation halts the flow of coffee from the filter basket when the carafe is removed, and then a cup can be poured earlier brewing is finished. The carafe should be returned to the keep warm plate (maximum 20 seconds) to prevent the filter basket from alluvion.

For Best Results

Be sure to add together a pocket-size amount of extra h2o to account for the amount of water lost in wetting the grounds and through evaporation during the brewing procedure.
When using paper filters, be sure that it is completely open up and fully inserted in the basket. Information technology may aid to fold and flatten the seams of the paper filter beforehand.
Once the coffee has finished brewing, stir it before serving to blend the flavors. The coffee at the lesser of the carafe will be somewhat stronger than the coffee at the elevation.

NOTE: The maximum amount of ground java the coffee maker tin accept is 15 scoops or tablespoons. Exceeding this amount may cause overflow if the coffee is too finely ground.

Descaling
For the all-time performance from your Braun coffee maker, descale the unit when the LED CLEAN (f) lights up solid green. This indicates it is time to descale your coffee maker.
To set water hardness, see «Setting the Water Hardness Level».
The removal of built-upwardly calcium deposits from the water reservoir will help extend the life of your coffee maker and keep your coffee tasting swell.
The frequency volition depend upon the hardness of your tap water and how oft y'all use the coffee maker.
You can utilize a commercially available descaling agent that is safe to use on aluminum.
Nosotros recommend using the Braun Descaling Solution (tin be purchased in stores, through the Braun website, or by calling Client Service).
NOTE: For your convenience, the cleaning cycle is automatic. The unabridged cleaning bicycle including rinsing can take up to 45 minutes to complete.

Remove the charcoal h2o filter holder (8) including the charcoal h2o filter (vii) and the gilt-tone permanent filter (5).
Follow package instructions on the descaling agent.
Identify the empty carafe in its position on the go along warm plate (9).
Press the CLEAN push button (f). The light-green LED in a higher place the button will start flashing.
Printing BREW (a) to start the descaling program, while the greenish LED is still flashing. Once the descaling process has started, it is not possible to stop the program until finished.
When the descaling plan has been completed, the green LED will turn off.
Discard the cleaning solution and rinse the carafe thoroughly with make clean water.
Fill the water reservoir with a full carafe (12 cups) of clean, freshwater. Run the coffee maker through two complete brew cycles to flush the unit of measurement afterwards descaling. Employ a total carafe of fresh cold water each time.

Repeat the procedure as many times as necessary in guild to reduce the brewing fourth dimension per loving cup to a normal level.

Cleaning and Maintenance (C)

Always plow the coffee maker off and remove the plug from the electric outlet before cleaning.
Elevator up the reservoir cover. Remove the gold-tone permanent filter and discard the ground coffee.
Remove the carafe from the go on warm plate and discard whatsoever remaining coffee.
The filter handbasket, aureate-tone permanent filter, carafe, and hat can be washed in warm, soapy water and rinsed thoroughly, or cleaned in the upper rack of the dishwasher. Dry all parts afterward utilise.
Exercise not use any scouring agents or harsh cleansers on any function of the java maker.
Never immerse the unit in water or other liquids.
To make clean the base, simply wipe with a clean, damp fabric and dry out before storing.
Exercise not put any water in the unit once the filter basket has been removed. Wipe the area under the filter basket with a damp cloth.
Fingerprints and other blemishes on the housing tin be wiped off with soap and water or a not-abrasive cleaning solution.
Do non dry out the inside of the water reservoir with a cloth, as lint may remain.
Both the design specifications and these user instructions are subject to modify without notice.
Do not dispose of the product in the household waste at the cease of its useful life.

Trouble	Potential Causes	Solution
The ON/OFF switch does non low-cal upwardly	• The appliance is unplugged • There was a power outage • ON/OFF button was not pressed	• Plug unit in • Expect for power to be restored • Press ON/OFF button
The display does non show a time	• The appliance is unplugged • There was a power outage	• Plug unit in • Expect for power to exist restored
Display flashes «2:00 AM»	Initial functioning or there was a power outage	Ready clock
It is non possible to prepare the Auto ON fourth dimension	• ON/OFF button was not pressed • Clock has not been fix	• Press the ON/OFF button • Set up clock time
Information technology is non possible to actuate the AUTO ON time	• ON/OFF push was non pressed • AUTO ON time has not been fix	• Press the ON/OFF button • Ready Automobile ON fourth dimension
Information technology is non possible to modify the Automobile OFF fourth dimension	• ON/OFF button was non pressed • Clock has non been set	• Press the ON/OFF button • Set clock time
The light-green LED light to a higher place Mash does not light upwardly	• The apparatus is unplugged • In that location was a ability outage • ON/OFF button was not pressed and the BREW button was not pressed	• Plug unit in • Await for power to be restored • Press the ON/OFF button, followed by BREW
Coffee is not brewing	• The apparatus is unplugged • There was a ability outage • Brew push button was not pressed • There is no water in the reservoir	• Plug unit in • Wait for ability to be restored • Press Brew butto • Pour h2o into the reservoir
The coffee maker is only brewing h2o	There are no java grounds in the filter basket	Add the desired amount of coffee to the filter
The java maker is inundation	The filter basket is not properly inserted	Insert the filter basket correctly
	The carafe was not properly positioned on the proceed warm plate	Be sure the carafe is centered directly under the filter handbasket
	The chapeau is not on the carafe	Place the lid on the carafe
	The carafe was removed for more than xx seconds while the unit is brewing	The carafe should be replaced promptly after removing
	Using also much java grounds	Remove the filter from the filter basket. If using the gold-tone permanent filter, discard coffee and rinse. If using a paper filter, replace it with a new one. Restart the java brewing process with the proper amount of coffee grounds
	Using coffee that is too finely ground	Utilize only coffee that is ground for baste coffee makers
	Paper filter and gold-tone permanent filter are used together	Employ either paper or the gold-tone permanent filter, never both at the aforementioned time
Java is flowing out of the filter handbasket and onto the keep warm plate when the carafe is not in place	The filter basket spring popped out during cleaning	Reattach the leap to the filter basket
Coffee is not hot	• There was a power outage • Auto-off was activated	• Wait for power to exist restored
There are coffee grounds at the bottom of the carafe	The filter (paper or gold-tone) was non inserted correctly into the filter basket	Rinse filter handbasket, set filter into the filter basket and restart brewing
	Paper filter complanate	Remove filter, rinse filter basket and restart brewing with a new paper filter
The display shows «E01», «E02» or «E03»	—-	Contact Braun Customer Service

Documents / Resources

References

BRAUN Kitchen Collection USA - #ConquerTheExpected